TM 9-4520-258-14
4-24. CONTROL BOX ASSEMBLY - continued.
c.
Assembly - continued (Refer to Figure 4-32)
Flameout, High Temp and Power Lights
NOTE
All three lights are the same. Only the cap colors differ. Power light is green, others are red.
(12)
Install gasket (1), light (2), lockwasher (3) and nut (4).
(13)
Install bulb (5) and cap (6).
(14)
Connect wires for each light as follows:
(a)
Power Light (7) - connect wire DS1-POS (8) and wire DS1-NEG (9).
(b)
High Temp Light (10) - connect wire DS2-POS (11) and wire DS2-NEG (12).
(c)
Flameout Light (2) - connect wire DS3-POS (13) and wire DS3-NEG (14).
Figure 4-32. Control Box Assembly Power, High Temp and Flameout Lights
4-105
