TM 9-4520-258-14
4-25. FUEL PRESSURE GAGE.
This task consists of:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
General Safety Requirements:
Tool Box, General Mechanics (Item 1, App B)
WARNING
Equipment Condition:
Contact with hot components can cause burns.
Unit disconnected from power source (para 2-8)
Allow unit to cool down before attempting
service/inspection/maintenance activity.
Fuels Flammable / No Smoking.
a.
Removal (Refer to Figure 4-36.)
WARNING
Contact with hot components can cause burns. Allow unit to cool down before attempting
service/inspection/maintenance activity.
(1)
Open control panel cover (1).
(2)
Open side, front door (2).
WARNING
Fuel is flammable and toxic to eyes, skin, and respiratory tract. Skin/eye protection required.
Avoid repeated/prolonged contact. Use only in well ventilated areas. Keep away from open
flames or other sources of ignition. No SMOKING around the area. Suitable fire extinguisher
must be present.
Fuel on clothing can be fatal if ignited by a static discharge. If fuel gets on your clothes, leave
the refueling area as soon as possible and wet clothes with water before taking them off. In
extreme cold conditions, clothes should not be wet; instead, ground yourself to a piece of
grounded equipment by taking hold of it before taking off the clothes. Wash skin with warm
soapy water.
(3)
Disconnect tubing (3).
(4)
Remove two nuts (4), two lockwashers (5), bracket (6), and gage (7).
4-110
