TM 9-4520-258-14
4-26. COMBUSTOR CONTROL RELAY (K1) ASSEMBLY - continued.
b.
Disassembly (Refer to Figure 4-38)
(1)
Remove nut (1) and screw (2) and lever arm (3).
(2)
Remove two screws (4), solenoid (5) and retainer plate (6) from combustor control relay cover (7).
c.
Repair
Repair limited to replacement of defective parts.
d.
Assembly (Refer to Figure 4-38)
(1)
Install retainer plate (6) and solenoid (5) on combustor control relay (7) and secure with two screws (4).
(2) Place lever arm (3) through hole in retainer plate (6) and in slot on top of solenoid (5).
NOTE
Lever arm must move freely. Do not overtighten nut.
(3)
Insert screw (2) and nut (1) to secure lever arm (3).
Figure 4-38. Combustor Control Relay Assembly/Disassembly
4-115
