TM 9-4520-258-14
4-29.
COMBUSTOR FAN ASSEMBLY - continued.
(6)
Tag and disconnect black wire (17) from TM1-11, white wire (18) from TB1-5 and green wire (19) from
ground stud (20) on bottom of control box (21). Reconnect remaining wires. Cut wire ties (22) as required.
(7)
Remove wire ties (23) and wire bundle (24) from duct (25).
(8)
Loosen two clamps (26) and remove duct (25) and clamps (26).
(9)
Remove two nuts (27), two lockwashers (28), two screws (29), ground wire (30) and four flat washers (31).
Discard lockwashers.
(10)
Remove fan assembly (32).
(11)
Remove gasket (33). Discard gasket.
Figure 4-48. Combustor Fan Removal (Sheet 2 of 2)
4-132
