TM 9-4520-258-14
4-30.
FUEL PUMP AND SOLENOID VALVE.
This task consists of:
a. Removal
b. Disassembly
c. Repair
d. Assembly
e. Installation
f. Adjustment
INITIAL SETUP:
Tools:
Material/Parts:
Tool Kit, General Mechanics (Item 1, App B)
Lockwasher (Item 13, App H)
Wire Ties (Item 11, App E)
Equipment Condition:
Wire Tags (Item 9, App E)
Unit disconnected from power source (para 2-8)
Top Panel removed (para 4-19)
General Safety Requirements:
WARNING
Contact with hot components can cause burns.
Allow unit to cool down before attempting
service/inspection/maintenance activity.
a.
Removal (Refer to Figure 4-51) (1)
Open right rear door (1) and right side front door (2).
(2)
Disconnect tube assemblies (3), (4), (5) and (6).
(3)
Tag and disconnect wire (7) TB3-9/L1-BLK from TB3 (8) terminal 9. Reinstall remaining wires.
(4)
Tag and disconnect the following wires from TB1 (9). Reinstall remaining wires:
(a)
Wire (10), l1-BLK/TB1-7 from terminal 7.
(b)
Wire (11) TB1-9/L2-BLK from terminal 9.
(c)
Wire (12) L2-BLK/TB1-4 from terminal 4.
(5)
Remove wire ties (13) as required.
4-136
