TM 9-4520-271-14
0038 00
ASSEMBLY - Continued
Carbon Monoxide Detector CO2 Installation
1.
Install rivnuts (15) onto bracket (14).
2.
Carefully guide wires (6) through bracket (14).
3.
Install grommet (13) into front panel assembly (5).
4.
Carefully guide wires (6) through grommet (13) and position carbon monoxide detector CO2 (12) onto bracket (14).
5.
Install cover (11) with two washers (10), lockwashers (9) (item 27, WP 0062 00), and screws (8).
6.
Connect following four wires (6) to terminal board TB4 (7). Remove wire marker tags.
Red wire to TB4-6
Black wire and one white wire to TB4-7
Remaining white wire to TB4-8
7.
Install remote controller S6 (4) with four screws (3), washers (2), and nuts (1).
8.
0038 00-18