TM 9-4520-271-14
0038 00
ASSEMBLY - Continued
Front Panel Assembly Installation
1.
Install connector (13) and nut (12).
2.
Slide locknut (10) onto cable (11).
3.
Install cable (11) through connector (13). Adjust cable end length as required and tighten locknut (10).
5.
Install gasket (8) onto enclosure (9).
5.
Position front panel assembly (4) and connect following eight wires (5) to mode switch S8 (7) and terminal board TB4
(6). Remove wire marker tags.
Black wire P3-A to S8-31
White wire P3-B to TB4-3
Green wire P3-C to TB4 mounting screw
Red wire P3-D to S8-11
Blue wire P3-E to TB4-2
Orange wire P3-F to TB4-5
Red wire with black stripe P3-G to TB4-1
White wire with black stripe P3-H to S8-34
6.
Install wire ties as required.
7.
Install front panel assembly (4) with ten washers (3), lockwashers (2) (item 27, WP 0062 00), and screws (1).
0038 00-21
