TM 9-4520-271-14
0054 00
REPAIR
Repair is limited to replacement of defective parts.
ASSEMBLY
WARNING
Edges of sheet metal can be sharp and cause injury to personnel. Gloves are required when handling the
heat exchanger assembly.
1.
Slide heat exchanger assembly shell (6) onto heat exchanger assembly (11) with air inlet pipe (12) alined with large
opening in side of shell.
2.
Install shell extension (10), eight washers (9), lockwashers (8), and screws (7).
3.
Install three brackets (5) on heat exchanger assembly shell (6) with 12 washers (4), six screws (3), lockwashers (2), and
nuts (1).
0054 00-7
