T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & - 2
FRAME 18
Install Terminal Board:
NOTE
Read paragraph 2-4 on soldering before doing any work.
1.
Line up holes in terminal board (1) with holes in digital card cage (2).
2. Screw in and tighten 14 machine screws (3) and flat washers (4) with screwdriver.
3. Solder 11 wires (5) to jack tips (6); refer to wiring chart on frame 19.
4. Put tie wrap (7) around 11 wires (5).
GO TO FRAME 19
Volume IV
2-150
Para. 2-7, Task 16