T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
FRAME 14
Remove Push Switch S1:
1.
Tag and unsolder two wires (1) from push switch (2).
2. Unscrew jamnut (3) and lockwasher (4) with wrench. Look at switch (2) for cracks.
If bad, turn in switch. If OK, set aside for later use.
Install Switch:
3.
4.
5.
GO
Put switch (2) into base (5).
Screw in and tighten jamnut (3) and washer
Solder two wires (1) to terminals (6).
TO FRAME 15
(4) with wrench.
3-28
Volume IV
Para. 3-6, Task 4
