T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 1
Remove Plate:
1.
Unscrew and take out four machine screws (1), lockwashers (2), and fIat washers (3)
with wrench. Get rid of lockwashers (2).
2.
Look at screws (1) for stripped or damaged threads. If bad, turn in screws (1). If
OK, set aside for later use.
3. Look at plate (4) for cracks, breaks, or broken mirror. If bad, turn in plate (4). If
OK, set aside for Iater use.
Install Plate:
4.
Screw in and tighten four screws (1), new Iockwashers (2), and wadshers (3) in plate (4)
with wrench.
Follow-on Maintenance:
1. install TRU holding plate assembly in accessory storage assembly refer to
volume 1, para. 4-18.
2. Install accessory storage assembly cover; refer to volume 1, para. 4-18.
END OF TRU HOLDING PLATE ASSEMBLY MAINTENANCE
Para.3-9, Task 1
Volume IV
3-65/(3-66 blank)