T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 38
Install lDU Window and Spacers:
1.
Line up holes in spacer (1) with holes in panel (2).
2. Screw in and tighten six screws (3), new
screwdriver.
3. Put window (6) on spacer (1) and line up
Iockwashers (4), and washers (5) with
holes in spacer (7) with holes in spacer (1).
4. Screw in and tighten six screws (8), new Iockwashers (9), and washers (10) with
screwdriver.
Follow-on Maintenance:
1. InstalI panel assembly A1; refer to task 26.
2. InstalI thermal system test controller; refer to para. 2-5, task 8.
3. Install thermal system test controller case cover; refer to volume 1, para. 4-18.
TASK 17 ENDS HERE
Volume IV
Para. 2-6, Task 17
2-87
