c. Installation. Reverse the procedure in
(3) Remove the engine mounting brackets
a. a b o v e .
and the rubber resilient mounts from the engine.
Separate the rubber mounts from the mounting
brackets.
a.
Removal
b. Cleaning. Clean the mounting brackets with
(1) Remove the capscrews and the washers
SD and dry them thoroughly.
h o l d i n g the engine mounting brackets (fig. 1-1) to
c. Inspection. Check the mounting brackets for
the engine.
serviceability and if they are defective, install
(2) Remove the bolts, washers, and nuts
serviceable ones.
h o l d i n g the engine mounting brackets to the engine
d. Installation. Reverse the procedure in
mounting base.
a. a b o v e .
NOTE
NOTE
When removing the right engine mounting
See TM 5-2805-206-14 for all other engine
bracket it will be necessary to remove the bolt,
maintenance (Group 01) for the MIL-STD model
flatwasher, Iockwasher, and nut holding the
1A08-3.
grounding strap to the engine mounting base.
