TM 5-3895-377-13&P
g.
Starting Burner.
(1)
Loosen six latches (7) and remove front burner access cover (8).
(2)
Switch circuit breaker (9) to "ON" position.
(3)
Set the TEMP SETTING dial (10) to desired temperature.
(4)
Set the LIMIT SETTING dial (11) to setting 25° higher than the temperature setting (do not exceed 475').
(5)
Push START button (12).
(6)
Watch for flame through burner cover window (13).
(7)
If burner does not start, push reset button (14).
(8)
Wait 30 seconds and push start button (12) again.
(9)
Monitor temperature gage during operation.
(10) Install front burner access cover (8) and close six latches (7).
h.
Shutting Down Burner.
(1)
Push STOP button (14).
(2)
Switch circuit breaker (7) to "OFF" position.
2-27
