TM 5-3895-377-13&P
e.
Installing Transfer Hoses (cont).
(2)
Pumping from external source to tank.
WARNING
•
Oil is slippery and can cause falls. Wipe up spilled oil with rags.
•
Transfer oil will become extremely hot during operation. Be careful not to touch the hot oil
or allow hot oil to come in contact with skin. Transfer oil can become hot enough to cause
serious burns or death to personnel.
NOTE
Ensure that all valves are closed before removing caps. Failure to do so may result
In drainage of oil from system.
(a)
Remove one transfer hose (1) from hose trough.
(b)
Place drain pan under EXTERNAL INPUT port (2).
(c)
Remove cap (3) from EXTERNAL INPUT port (2).
(d)
Install nut (4) on coupling section (5).
(e)
Install coupling section (5) on EXTERNAL INPUT port (2) on Heater.
(f)
Install coupling section (6, on transfer hose (1).
(g)
Install transfer hose (1) on EXTERNAL INPUT port (2) and external source. Tighten nuts (4)
2-23
