TM 5-3895-377-13&P
b.
Disconnect from towing vehicle.
(1)
Remove pin (9) from front screw jack (10) and allow screw jack to pivot down.
(2)
Install pin (9) in screw jack (10).
(3)
Remove sand pad from stowage box and position it under screw jack (10).
(4)
Turn handle (11) until base of screw jack (10) rests in sand pad.
NOTE
If towing vehicle provides a 12 Vdc connection for towed vehicle, perform steps (9) through (11)
only. If towing vehicle provides a 24 Vdc connection for towed vehicle, perform steps (5)
through 8 only.
(5)
Lift cover (35) and disconnect 24 Vdc intervehicular cable (30) from towing vehicle connector (36).
(6)
Lift cover (33) and disconnect 24 Vdc intervehicular cable (30) from connector (34) on Heater.
(7)
Slide catch (32) back and allow cover (31) to close. Repeat this step for the other end of the cable.
(8)
Place 24 Vdc intervehicular cable (30) in stowage box.
2-49
