TM 5-4520-253-13
GENERAL REPAIR HEATER CASE ASSEMBLY (CONT)
5. If label has partially peeled, press back in place.
Replace labels which will not stick firmly to
surface. Proceed as follows:
a. Peel off defective label.
Dry cleaning solvent P-D-680 (safety or Stoddard’s Solvent)
is potentially dangerous.
Avoid repeated and prolonged
breathing of vapors and skin contact with the liquid. Do
not use near open flame, arcing equipment, or other igni-
tion sources. Always wear eye protection and protective
clothing. Flash point of P-D-680 is 100° to 138° F (38° to
59° C).
b. Use rag dampened with P-D-680 dry cleaning solvent to clean off old adhesive, dirt, and
grease or oil. Allow surface to air dry.
c. Carefully apply appropriate pressure sensitive label.
d. Straighten bends and hammer out dents which interfere with mounting or operation of heater
or its components.
Replace removable parts of heater case assembly if badly damaged or
distorted.
e. Be sure grounding strap is fastened securely to one of mounting brackets.
4-36
