TM 9-4520-258-14
4-36. POWER CABLE ASSEMBLY - continued.
d.
Repair - continued (Refer to Figure 4-75)
(9)
Slide cable clamp (8), grommet follower (9), grommet (10), rubber bushing (11), and sleeve
assembly (12) on cable (1).
(10)
Strip .75 inch of insulation from cable (1) to expose insulated conductor wires (13), (14)
and (15).
(11)
Strip .25 inch of insulation from insulated conductor wires (13), (14) and (15) Solder wires
into connector plug (3) pins as follows:
(a)
Black wire (13), P1-A/TB1-1 to pin A.
(b)
White wire (14), P1-B/TB1-2 to pin B.
(c)
Green wire (15), P1-C/G1 to pin C.
Figure 4-75. Power Cable Repair (Sheet 2 of 3)
4-178
