TM 9-4520-271-14
0022 00
DISASSEMBLY
Continued
7.
Drill out two rivets (14) and remove sight glass cover (15).
8.
Drill out three rivets (16) and remove exhaust pipe storage door (17).
9.
Drill out two rivets (18) and remove information plate (19).
10. Remove gaskets (20 thru 23).
11. Remove three stud retaining rings (24) and three studs (25).
12. Remove three retaining rings (26) and three grommets (27).
13. Drill out six rivets (28) and remove three receptacles (29).
NOTE
Information plates are attached using two or four rivets each. Remove the quantity of rivets the
configuration requires.
14. Drill out eight rivets (30) and remove information plates (31, 32, and 33) as required.
0022 00-5
