TM 9-4520-271-14
0022 00
DISASSEMBLY
Continued
15. Remove two gaskets (34) and gaskets (35 and 36).
16. Remove insulation pieces (37 and 38) and two pieces of insulation (39) as required.
REPAIR
1.
Repair is limited to replacement of defective parts.
2.
Inspect rear panel assembly for cracks. Notify direct support maintenance to have cracks welded.
ASSEMBLY
WARNING
Rubber adhesive is flammable. Keep away from open flames or other sources of ignition. Avoid breathing
fumes from adhesive. Good general ventilation is normally adequate. Avoid skin contact with adhesive.
1.
Apply rubber adhesive to center area of insulation (39, 38, and 37) (items 30, 95, and 20, WP 0047 00) and mating
surfaces and install insulation.
2.
Install gaskets (36 and 35) (items 66 and 67, WP 0047 00) and two gaskets (34) (item 65, WP 0047 00).
0022 00-6
