TM 9-4520-271-14
0022 00
INSTALLATION
Continued
7.
Install dust cap (16).
8.
Apply sealing compound (item 17, WP 0061 00) to threads of elbow (13) and straight connector (15).
9.
Remove any covers from tube assemblies (14 and 12).
10. Open side rear door (11) and connect tube assembly (14) to straight connector (15) and connect tube assembly (12) to
elbow (13).
11. Install isolator frame (10), ten washers (9), lockwashers (8) (item 28, WP 0062 00) and screws (7).
12. Apply gasket material (6) (item 9, WP 0061 00) around exhaust pipe.
13. Install seal plate (5), four lockwashers (4) (item 29, WP 0062 00), and screws (3).
14. Install exhaust protective cover (2) and four screws (1).
END OF WORK PACKAGE
0022 00-10
