TM 9-4520-271-14
0022 00
INSTALLATION
1.
Apply a bead of sealing compound (item 16, WP 0061 00) to inside flange of sight tube adapter (30).
2.
Install sight tube adapter (30) onto rear panel assembly (24).
3.
Install rear panel assembly (24) onto frame (25) over isolator (26) and sight tube (27), gently pulling isolator through rear
panel assembly so it rests on outside of rear panel assembly.
4.
Install cable (29) onto cover (2) with rivet (28) (item 8, WP 0062 00).
5.
Install cover (2), 18 washers (23), lockwashers (22) (item 28, WP 0062 00), and screws (21).
6.
Install three screws (20), six washers (19), three lockwashers (18) (item 28, WP 0062 00), and nuts (17).
0022 00-9