TM 9-4520-271-14
0026 00
DISASSEMBLY
Continued
Combustion Control Relay K1 Removal
1.
Open side rear door (1).
2.
Tag all wires (2) attached to grounding stud (3). Cut wire ties as required.
3.
Remove nut (4), lockwasher (5), wires (2), nut (6), lockwasher (7), grounding stud (3), wires (2) (GND), and lockwasher
(8). Discard lockwashers.
4.
Tag and cut splices (9) from carbon monoxide detector wires CO-1 thru CO-3 (10).
5.
Tag and disconnect wires (11) from the following:
TB1-4 thru TB1-7 (12)
TB2-1 and -8 (13)
TB3-1 thru TB3-6 (14)
S1-27 and -47 (15), S7-2 (16), and DS3 (17)
6.
Remove six nuts (18), lockwasher (19), washers (20), screws (21), and combustion control relay K1 (22). Discard
0026 00-12
