TM 9-4520-271-14
0026 00
DISASSEMBLY
Continued
Carbon Monoxide Detector CO1 Assembly Removal
1.
Open side rear door (1).
2.
Tag wires CO-1 thru CO-5 (2) and remove screws (3) and wires (2).
3.
Remove four screws (4), lockwashers (5), washers (6), and carbon monoxide detector CO1 assembly (7). Discard
lockwashers.
4.
Remove two screws (8), lockwashers (9), washers (10), and cover (11). Discard lockwashers.
5.
Remove carbon monoxide detector CO1 (12) and tag and carefully guide wires (13) from bracket (14).
6.
Remove four nuts (15), lockwashers (16), washers (17), screws (18), and relay board (19). Discard lockwashers.
7.
Drill out rivnuts (20) as required.
0026 00-14