TM 9-4520-271-14
0026 00
ASSEMBLY
Continued
Transformer TR2 Installation
1.
Place transformer TR2 (11) into position.
2.
Install two splices (10) onto wires from S1-33 (9) and CB2-3 (8). Remove wire marker tags.
3.
Install two ground lugs (7), screws (6), washers (5), lockwashers (4) (item 27, WP 0062 00), and nuts (3).
4.
Connect two transformer TR2 wires to terminal board TB2 (2) terminals 8 and 1. Remove wire marker tags.
WARNING
Acrylic lacquer sealant is flammable. Keep away from open flames or other sources of ignition. Avoid
breathing fumes from sealant. Good general ventilation is normally adequate. Avoid skin contact with
sealant.
5.
Apply light coat of acrylic lacquer sealer to transformer TR2 (10) connections.
6.
Close side rear door (1).
0026 00-19
