TM 9-4520-271-14
0026 00
ASSEMBLY
Continued
Combustion Control Relay K1 Installation
1.
Install combustion control relay K1 (22), six screws (21), washers (20), lockwashers (19) (item 20, WP 0062 00), and
nuts (18).
2.
Connect wires (11) to the following. Remove wire marker tags.
DS3 (17), S7-2 (16), and S1-27 and -47 (15)
TB3-6 thru TB3-1 (14)
TB2-8 and -1 (13)
TB1-7 thru TB1-4 (12)
3.
Install splices (9) onto wires CO-3 thru CO-1 (10). Remove wire marker tags.
4.
Install lockwasher (8) (item 23, WP 0062 00), wires (2) (GND), grounding stud (3), lockwasher (7) (item 23,
WARNING
Acrylic lacquer sealant is flammable. Keep away from open flames or other sources of ignition. Avoid
breathing fumes from sealant. Good general ventilation is normally adequate. Avoid skin contact with
sealant.
5.
Apply light coat of acrylic lacquer sealer to grounding stud (3) connections.
6.
Close side rear door (1).
0026 00-18
