TM 9-4520-271-14
0026 00
DISASSEMBLY
Continued
Motor Contactor and Motor Overload Protector Removal
1.
Open side rear door (1).
2.
Loosen setscrew (2) and slide clamp (3), motor contactor (4), and motor overload protector (5) from mounting plate (6).
3.
Tag ten wires (7).
4.
Loosen ten setscrews (8) and disconnect wires (7) from motor contactor (4) and motor overload protector (5).
5.
Loosen three setscrews (9) and separate motor overload protector (5) from motor contactor (4).
6.
Remove two nuts (10), lockwashers (11), four washers (12), two screws (13), and mounting plate (6). Discard
7.
Remove gasket (14).
0026 00-13