TM 9-4931-381-14&P-2
FRAME 6
Remove Terminal Board:
NOTE
Read paragraph 2-4 on tagging and soldering wires before
doing any work,
1.
Tag and unsolder eleven wires (1) from jack tips (2).
2.
Cut and remove tie wrap (3) with knife.
3
Unscrew and take out 14 machine screws (4) and fIat washers (5) with screwdriver.
4.
Lift terminal board (6) off of digital subsystem assembly (7). Look at terminal board
(6) for bends or cracks. If bad, turn in terminal board (6), go to follow-on
maintenance, and TASK 6 ENDS HERE. If OK, GO TO FRAME 7.
GO TO FRAME 7
Volume IV
2-128
Para. 2-7, Task 6
