TM 9-4931-381-14&P-2
FRAME 7
Inspect Terminal Board:
1 .
Look at 28 receptacle connectors (1) for cracks and bent or broken pins. If bad, turn
in terminal board (2), go to follow-on maintenance, and TASK 6 ENDS HERE. If OK,
go to step 2.
2. Look at 12 electrical-mechanical posts (3) for cracks or looseness. If bad, replace
post (3); refer to task 7. If OK, 90 to step 3.
3. Look at six connectors (4) for cracks and bent or broken electrical contacts (5). If
bad, replace contacts (5); refer to task 13. If OK, set terminal board (2) aside for
later use.
Follow-on Maintenance:
NOTE: To install terminal board, refer to task 16.
TASK 6 ENDS HERE
Volume IV
Para. 2-7, Task 6
2-129
