T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 9
Remove End Plate:
NOTE
l
Use this task to remove either of two end plates.
l
Read paragraph 2-4 on replacing nutplates before doing
any work.
1.
Unscrew and takeout four machine screws (1) and Iockwashers (2) with screwdriver.
Take off end plate (3) and get rid of Iockwashers (2).
2.
Look at end plate (3) for cracks or bends. If bad, turn in end plate, go to follow-on
maintenance, and TASK 8 ENDS HERE. If OK, go to step 3.
3. Look at end plate (3) for loose or missing plain self-locking nuts (4) or stripped
threads. If bad, replace nut (4).
Follow-on Maintenance:
NOTE: To install end plate, refer to task 15.
TASK 8 ENDS HERE
Volume IV
Para. 2-7, Task 8
2-133