T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 10
Remove Center Plate:
1.
2.
3.
4.
NOTE
Read paragraph 2-4 on replacing nutplates and rivets before
doing any work.
Take out eight tubular rivets (1) from center plate (2) with drill, bit, punch, and
hammer.
Take out center plate (2). Look at center plate (2) for cracks or bends. If bad, turn
in, go to follow-on maintenance, and TASK 9 ENDS HERE. lf OK, go to step 3.
Look at center plate (2) for loose or broken jack tips (3). If bad, replace jack tips
(3); refer to task 11.
Look at center plate (2) for Ioose or missing plain self-locking nuts (4) or stripped
threads. If bad; replace nut (4).
Follow-on Maintenance:
NOTE: To install center plate, refer to task 14.
TASK 9 ENDS HERE
Volume IV
Para. 2-7, Task 9
2-135
