T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
FRAME 21
Remove Connector:
NOTE
Read paragraph 2-4 on tagging and crimping wires before
doing any work.
1.
2.
3.
4.
Remove two nuts (1), lockwashers (2), and washers (3) from connector (4) with
wrench, socket, and ratchet.
Take out connector (4) and electrical polarizing keys (5) from enclosure (6) with
socket, ratchet, and wrench.
Using extract tool, remove wires (7) from connector (4). Get rid of connector (4).
Look at contacts (8) for bends, breaks, or corrosion. If bad, replace contacts (8).
GO TO FRAME 22
Volume IV
Para. 2-9, Task 11
2-245
