T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 38
Install Power Module A6:
N O T E
If power module (1) was lowered for access only, GO TO
FRAME 39.
1. Line up holes in power module (1) with holes in chassis (2).
2. Screw in two machine screws (3), two sleeve spacers (4), four flat washers (5), and
two self-locking nuts (6) on angle bracket (7) with screwdriver and wrench.
3. Torque screws (3) between 10 and 20 pound-inches (1.1 and 2.3 Newton-meters) with
torque screwdriver, and No. 2 cross tip bit.
4. Posistion receptacle connector (8) on receptacle connector body (9). Push in and turn
handle (10) one-quarter turn clockwise on four connectors (8).
GO TO FRAME 39
Volume IV
Para. 2-9, Task 22
2-273
