T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 36
InstalI Relay Bracket:
1.
Line up relay bracket (1) with holes in encIosure (2).
2. Screw in four machine screws (3) and flat washers (4) with screwdriver.
3. Using torque screwdriver and cross tip bit, torque screws (3) between 6 and 7 pound-
inches (0.68 and 0.79 Newton meter).
Follow-on Maintenance:
1. Install connector bracket; refer to task 21.
2. Install power module A6; refer to task 22.
3. Install thermal system test controller; refer to para. 2-5, task 8.
4. Install thermal system test controller case cover; refer to volume 1, para. 4-18.
TASK 20 ENDS HERE
Volume IV
Para. 2-9, Task 20
2-269
