T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
F R A M E 1
Remove Panel Connector Bracket:
1.
2.
3.
4.
NOTE
Read paragraph 2-4 on replacing nutplates before doing
any work.
If taking out connector bracket (1) for access only, do
steps 1 and 2 only.
Unscrew and take out four machine screws (2) and flat washers (3) with screwdriver.
Lift bracket (1) away from chassis (4).
Look at bracket (1) for cracks, bends, and stripped holes. If bad, remove connectors,
refer to task 3, and turn in bracket (1). lf OK, do step 4.
Look at bracket (1) for damaged plain self-locking nuts (5). lf bad, replace nut (5).
lf OK, set aside for Iater use.
Follow-on Maintenance:
NOTE: To install panel connector bracket, refer to task 15.
TASK ENDS HERE
Volume IV
Para. 2-11, Task 2
2-283
