T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P -2
F R A M E 12
Install Relay:
1.
2.
3.
4.
5.
GO
Line up holes in new relay (1) with holes in chassis (2).
Screw in and tighten two screws (3), two new Iockwashers (4), four washers (5), and
two nuts (6) with screwdriver and wrench.
Install two sleevings (7) to semiconductor device (8).
CAUTION
Backward installed semiconductor (8) can cause damage to
relay (1). Make sure the band on the semiconductor (8) is
facing toward the correct pin on relay (1).
Install semiconductor (8) to relay (1).
Solder wires (9) to relay (1) and put on lacing tape.
TO FRAME 13
Volume IV
Para. 2-11, Task 8
2 - 2 9 9
