T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 14
Remove Terminal Lug and Electrical-Mechanical Post:
1.
2.
3.
4.
5.
6.
NOTE
Use this task to replace any of six terminal lugs or
posts E1, E2, E4, E5, E6, or E7. Terminal lug E4 is
shown.
If replacing only post do steps 1 and 3 through 6.
Read paragraph 2-4 on tagging and soldering wires
before doing any work.
Cut lacing tape off of wires (1) with diagonal pliers.
Tag and unsolder and takeoff wires (1) from terminal lug (2) with soldering gun and
long nose pliers.
Unscrew and takeout machine screw (3), lockwasher (4), and flat washer (5) with
screwdriver. Get rid of Iockwasher (4).
Lift terminal lug (2) off post (6). Look at terminal lug (2) for cracks. If bad, turn in
terminal lug (2). If OK, set aside for later use.
Unscrew and takeout screw (7), lockwasher {8), and washer (9) with screwdriver and
wrench. Get rid of Iockwasher (8).
Look at post (6) for cracks. If bad, turn in post (6). If OK, set aside for later use.
GO TO FRAME 15
Volume IV
2-302
Para. 2-11, Task 9
