T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 9
Remove Push Switch S1 (Continued):
1. Unscrew jamnut (1) and Iockwasher (2) from switch (3) with wrench. Look at switch
(3) for cracks. If bad, turn in switch (3). If OK, set aside for later use.
2. Look at handle case (4) for cracks or breaks. If bad GO TO FRAME 10 and turn in
cable assembly W11. If OK, set aside for later use.
3. Look at cable (5) for cuts or breaks. If bad refer tO para 3-4. If OK, set aside for
later use.
GO TO FRAME 10
3-22
Volume IV
Para 3-6, Task 3
