T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
FRAME 1
Remove Panel Assembly:
1.
Unscrew and take out two machine screws (1) and flat washers (2) from each side of
chassis angles (3) with cross tip screwdriver.
2.
Unscrew and take out ten screws (4), Iockwashers (5), and washers (6) from bottom
of panel (7) with cross tip screwdriver.
3.
Unscrew and take out four machine screws (8), Iockwashers (9), and flat washers (10)
from RFI filter assembly (11) with cross tip screwdriver. Get rid of lockwashers (9).
NOTE
There are eight machine screws (12), Iockwashers (13), and
flat washers (14) on each side of panel (7) near handles (15).
Leave in the top screw (12), lockwasher (13), and washer (14)
on each side untiI frame 4.
4.
Unscrew and take out eight screws (12), Iockwashers (13), and washers (14) with
cross tip screwdriver.
GO TO FRAME 2
Volume IV
Para. 2-6, Task 1
2-33
