Burner (Liquid Fuel)

TM 10-4500-200-13

the fuel hose to the adapter.

vent tube from the adapter.

b. Inspection.

(1) Inspect the vent tube for looseness.,

distortion, damaged threads, and for a re-

stricted condition.

(2) Replace a defective vent tube.

c. Installation.

(1) Refer to figure 3-2 and install the

vent tube on the adapter.

3-25. Burner (Liquid Fuel)

a. Inspection.

(1) Inspect the fuel hose for deteriora-

tion, cuts, leaks, and for a restricted con-

dition.

(2) Replace a defective fuel hose.

b. Removal. Refer to figure 3-1 and dis-

connect the fuel hose from the drip inter-

ceptor loop and the drip valve.

c. Installation. Refer to figure 3-1 and

reconnect the fuel hose to the drip inter-

ceptor loop and the drip valve.

3-24. Hose Assembly

a. Removal. Refer to figure 3-3 and re-

move the burner assembly from the heat-

er body.

b. Cleaning and Inspection.

ME 4500-200-13/3-2

(1) Clean carbon d e p o s i t s from the

Figure 3-2. Adapter kit and vent tube installation and

burner body and burner cap with a screw-

removal.

driver.

3-23. Vent Tube

(2) Inspect all parts for cracks, breaks,

and other damage.

a. Removal.

(3) Replace a defective burner.

(1) Remove the adapter from the fuel

c. Installation. Refer to figure 3-3 and

install the

(2) Refer to figure 3-2 and unscrew the

3-6