TM 9-2540-207-14&P
5.1.3
BOTTOM SHELL
Figure 5-1.4. Bottom Shell
Removal
1.
Remove Top Shell (ref. 5.1.2)
2.
Using a 1/4" nut driver or 1/4" socket, remove three (3) self tapping screws. Lift off the Bottom Shell by gripping
both sides and flexing open.
Installation
Note: If the Name Plate is to be replaced:
i.
Stamp Heater serial number onto replacement Name Plate using punches
and stamps.
ii.
Attach the Name Plate to the replacement Bottom Shell with four (4) 1/8 x 1/4
stainless steel pop rivets using a pop rivet gun.
1.
Replace Bottom Shell ensuring the holes in the Bottom Shell line up with the fasteners on the Heat Exchanger.
5-7
