TM 9-4520-251-14
4-54 GENERATOR EXHAUST STACK AND SPARK ARRESTOR
This task covers:
a. Inspection
b. Removal
c. Installation
INITIAL SETUP
Tools
Materials/Parts
Tool kit, service, refrigeration unit
Exhaust cover and cable
(Appendix B, Section Ill, Item 1)
(assembled)
Generator exhaust stack
Gasket
Spark arrestor
General Safety Instructions
Heat exchanger casing and generator exhaust stack may become dan-
gerously hot.
Do not touch heater parts during or immediately after operation.
Perform maintenance only after heater has cooled.
Location/Item
Action
Remarks
INSPECTION
Heat exchanger casing and generator exhaust stack may become dan-
gerously hot.
Do not touch heater parts during or immediately after operation.
Perform maintenance only after heater has cooled.
1. Generator ex–
Inspect generator exhaust stack (1) for bends or
haust stack
distortions.
2. Exhaust cover
Check exhaust
cover (2) for snug,
weathertight fit
without binding.
4-132
