T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
F R A M E 1 9
Remove Terminal Lug or Electrical-Mechanical Post:
1.
2.
3.
4.
Unscrew and take out machine screw (1), Iockwasher (2), flat washer (3), and
terminal lug (4) with screwdriver. Get rid of Iockwasher (2).
If terminal lug (4) is bad, unsolder 34 wires (5) and turn in terminal lug (4). If OK, go
to step 4.
Solder 34 wires (5) on new terminal lug (4).
NOTE
If replacing post (6), continue with step 4. If not, go to
step 6.
Unscrew and take out machine screw (7), Iockwasher (8), flat washer (9), and post (6)
with screwdriver. Get rid of Iockwasher (8) and turn in post (6).
Install Terminal Lug or Post:
5. Screw in and tighten screw (7), new Iockwasher
screwdriver.
6. Screw in and tighten screw (1), new Iockwasher
lug (4) with screwdriver.
(8), washer (9), and new post (6) with
(2), washer (3), and new terminal
NOTE
If replacing terminal lug or post only, go to follow-on
maintenance, and TASK 10 ENDS HERE.
GO TO FRAME 20
Volume IV
2-190
Para. 2-8, Task 10
