T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
F R A M E 3 2
1.
2.
3.
Install Power Supply:
NOTE
l
Use this task to install power supply PS1, PS2, PS3, or
PS4. Power supply PS1 (1) is shown.
l
If power supply was removed for access, do steps 1 and
2 only.
Carefully position power supply (1) on enclosure (2).
Screw in three machine screws (3), new Iockwashers (4), and flat washers (5) with
screwdriver. Using torque screwdriver and bit, torque screws between 6 and 7
pound-inches (0.67 and 0.79 Newton meter).
Reconnect wires (6) to new power supply (1); screw in and tighten six screws (7), new
Iockwashers (8), and washers (9) with screwdriver; refer to wiring chart, frame 33.
GO TO FRAME 33
Volume IV
2-262
Para. 2-9, Task 17
