T M 9 - 4 9 3 1 - 3 8 1 - 1 4 & P - 2
TASK 16. Replace Circuit Breaker CB1 or CB2.
Applicability: All Models
Common Tools:
Knife, pocket
Screwdriver, flat tip
Set, soldering and resoldering
Special Tools: None
Supplies:
NOTE: Expendable supplies are defined in volume 1, appendix C.
Circuit breaker (19200) 12303350 (CB1)
Circuit breaker (19200) 12303121 (CB2)
Pencil, writing (Item 19)
Potting, compound (Item 20)
Tag, marker (as required) (Item 34)
Personnel: One
Equipment Condition:
Thermal system test controlIer on a clean work surface.
Preliminary Procedures:
1. Remove thermal system test controlIer case cover; refer to volume 1, para. 4-17.
2. Remove thermal system test controller; refer to para. 2-5, task 2.
2-80
Volume IV
Para. 2-6, Task 16
