TM 9-4520-258-14
5-6.
HEAT EXCHANGER ASSEMBLY - continued.
a.
Removal - continued (Refer to Figure 5-11)
(5)
Remove two nuts (1), two lockwashers (2), four flat washers (3) and two screws (4).
Discard lockwashers.
(6)
Remove one nut (5), one lockwasher (6), two flat washers (7) and one screw (8) from left side of brace
(9). Discard lockwashers.
(7)
Remove second nut (5), second lockwasher (6), two flat washers (7), ground wire (10), star lockwasher
(11), second screw (8) and brace (9).
Figure 5-11. Heat Exchanger, Removal
5-25
